|
 |
|
  |
|
|
TacLamPLUS RF & Microwave Laminate 射频微波板材
Characteristics
Laser-ablatable
Sequential Multilayer
Very Low Loss
Low Moisture Absorption
High Peel Strength
Uniform & Consistent DK
Applications
Automotive Radar
mm-wave Radios
Power Amplifier
简单介绍TacLamPLUS
Taclamplus is a cost-effective, non-reinforced microwave substrate that can be used to create very low-loss struc-tures both with single dielectric layers and multiple layers.
Exceptional copper-foil adhesion allows small-feature resolution and the unique composition of the dielectric facilitates clean laser ablation for micro-via and component-cavity formation.
The use of a metal plate such as 1 mm copper helps maintain dimensional stability and provides a sound ground plane and heat-sink.
典型值TacLamPLUS
| TacLamPLUS TYPICAL VALUES |
| PROPERTY |
TEST METHOD |
UNITS |
VALUE |
UNITS |
VALUE |
Dielectric Constant
@ 50 GHz |
* |
|
2.10 |
|
2.10 |
Dissipation Factor
@ 50 GHz |
* |
|
0.0008 |
|
0.0008 |
Insertion Loss
@ 50 GHz |
IPC TM 650 2.6.2.1 |
dB/mm |
0.04 |
dB/mm |
0.04 |
| Moisture Absorption |
IPC TM 650 2.6.2.1 |
% |
|
% |
|
Peel Strength
(1 oz. copper) |
IPC TM 650 2.4.8 |
lbs./linear inch |
12.0 |
N/mm |
2.1 |
| Flammability |
UL-94 |
|
V-0 |
|
V-0 |
|
* Source: EADS Project Report 2002; PROKOSMOS.
| Type |
DK |
| TacLamPLUS |
2.10 |
| TLY-5A |
2.17 |
| TLY-5 |
2.20 |
| TLY-3 |
2.33 |
| TLT-0 |
TLX-0 |
2.45 |
| TLT-9 |
TLX-9 |
2.50 |
| TLT-8 |
TLX-8 |
2.55 |
| TLT-7 |
TLX-7 |
2.60 |
| TLT-6 |
TLX-6 |
2.65 |
| TLE-95 |
2.95 |
| TLC-27 |
2.75 |
| TLC-30 |
3.00 |
| TLC-32 |
3.20 |
| RF-30 |
3.00 |
| TSM-30 |
3.00 |
| RF-35A |
RF-35P |
3.50 |
| RF-60 |
6.15 |
| CER-10 |
10 |
|
How to order TacLamPLUS RF & Microwave Laminates
| Designation |
Dielectric
Constant |
Available Thickness |
| TacLamPLUS |
2.10 |
Increments of 0.0020" (0.05 mm) |
|
TacLamPLUS can be ordered with the following electrodeposited copper:
| Designation |
Weight |
Copper Thickness |
Copper Thickness |
Rms Treated Side |
Rms Treated Side |
| CQ |
1/4 oz./sq. ft |
~ 0.0004" |
~ 9 µm |
19 µin |
0.5 µm |
| CH |
1/2 oz./sq. ft |
~ 0.0007" |
~ 18 µm |
27 µin |
0.7 µm |
| C1 |
1 oz./sq. ft |
~ 0.0014" |
~ 35 µm |
64µin |
1.6 µm |
| C2 |
2 oz./sq. ft |
~ 0.0028" |
~ 78 µm |
77µin |
2.0 µm |
|
TacLamPLUS is typically supplied as heavy metal-backed material using a 1.00 mm copper plate. Please contact your nearest Customer Service Department for any other heavy metal backing material or thickness.
| Typical Panel Sizes |
| 12" x 18" |
304 mm x 457 mm |
| 16" x 18" |
406 mm x 457 mm |
| 18" x 24" |
457 mm x 610 mm |
|
An example of our part number is: Taclamplus-210-0040-CH/C1mm-18x24" (Taclamplus-210-0040-CH/C1mm-457x610 mm)
 下载PDF档案TacLamPLUS
回到产品总目录
|
|
|
|
|
|
|