|
 |
|
  |
|
|
TLX RF & Microwave Laminate 射频微波板材
Characteristics
Excellent Mechanical & Thermal Properties
Low Dissipation Factor
Low & Stable Dielectric Constant
UL 94 V-O Rating
Tightly Controlled Dielectric Constant
Very High Thermal Reliability
Applications
Antennas
High Power Amplifier, TMA, TMB, LNA
Radio Link
Filter, Coupler, Splitter, Combiner, Mixer
Radar
Telemetry
Guidance Systems
Passive Components
Keyless Entry Systems
Transmitter
简单介绍TLX
Taconic has over 35 years of experience coating fiberglass fabric with PTFE
(polytetrafluoroethylene). This enables Taconic to manufacture copper clad
PTFE/woven glass laminates with exceptionally well controlled electrical and
mechanical properties.
These attributes effectively extend the usefulness of these laminates to
X-Band and above.
The dielectric constant (DK) range is 2.45 to 2.65. The DK can be specified
anywhere within this range with a tolerance of ± 0.04. The dissipation factor
is approximately 0.0006 when measured @ 1 MHz.
TLX laminates can be sheared, drilled, milled, and plated using standard
methods for PTFE/woven fiberglass materials. The laminates are dimensionally
stable, and exhibit virtually no moisture absorption during fabrication
processes.
TLX laminates are generally ordered clad on one or both sides with 1/2, 1, or
2 oz. electrodeposited copper foil. Contact our Customer Service Department
for alternate claddings.
Typical applications for TLX laminates include radar systems, phased array
antennas, mobile communica-tion systems, microwave test equipment, microwave
transmission devices and RF components.
The copper-clad laminates meet the latest revision of IPC-4103.
TLX laminates are tested in accordance with IPC-TM-650. A Certificate of
Compliance containing actual test data accompanies each shipment.
 典型值
下载PDF档案
回到产品总目录
|
|
|
|
|
|
|