|
 |
|
  |
|
|
RF-60A RF & Microwave Laminate
Characteristics
Exceptional Interlaminar Bond
Low Moisture Absorption
Enhanced Dimensional Stability
Low Z-Axis Expansion
Stable DK Over Frequency
Increased Flexural Strength
Applications
Power Amplifier
Phase Shifter
High Power Amplifier, TMA, TMB, LNA: for GSM, UMTS, 3G, PCS, PCN, WCDMA, TD-SCDMA, EDGE, CDMA2000
Repeater
Filters and Coupler
Passive Components
RFID Reader Antennas
SDARS Antennas
Introducing RF-60A
RF-60A is an organic-ceramic loaded laminate in the ORCER family of Taconic products.
It is based on woven glass reinforcement. RF-60A is a result of Taconic’s expertise
in both ceramic fill technology and in coated PTFE fabrics.
RF-60A exhibits exceptional interlaminar bond strength and solder resistance. RF-60A’s
proprietary composition results in low moisture absorption and uniform electrical properties.
RF-60A's woven glass reinforcement ensures excellent dimensional stability and enhances
flexural strength. The RF-60 laminate exhibits low Z-axis expansion (CTE 75 ppm/°C), allowing
for plated-through-hole reliability in extreme thermal environments.
RF-60A laminates can be sheared, drilled, milled and plated, using standard methods for
PTFE/woven fiber-glass materials. For processing information, refer to the RF-60 Fabrication
Guidelines.
RF-60A laminates are generally ordered clad on both sides with 1/2, 1, or 2 oz. electrodeposited
copper foil. Various panel sizes are available. Contact our Customer Service Department for
more information.
RF-60A laminates are tested in accordance with IPC-TM-650. A Certificate of Compliance containing
lot-specific test data accompanies each shipment.
 Typical Values
Data Sheet
Back to Products Overview
|
|
|
|
|
|
|