|
 |
|
  |
|
|
TLC RF & Microwave Laminate
Characteristics
Low Cost
Low Dissipation Factor
Tightly Controlled Dielectric Constant
Exceptional Dimensional Stability
High Flexural Strength
Very High Temperature Reliability
UL 94 V-O Rating
Applications
Antennas
Base Station Antennas: for GSM, UMTS, 3G, PCS, PCN, WCDMA, TD-SCDMA, EDGE, CDMA2000, HSDPA, MIMO, LTE, UMB
High Power Amplifier, TMA, TMB, LNA: for GSM, UMTS, 3G, PCS, PCN, WCDMA, TD-SCDMA, EDGE, CDMA2000
Filter, Coupler, Splitter, Combiner, Mixer
Sensors
Medical Scanner
Road Tolling Transmitter
Passive Components
Introducing TLC
Taconic has over 35 years of experience coating fiberglass fabric with PTFE
(polytetrafluoroethylene). This enables Taconic to manufacture copper clad PTFE/woven
glass laminates with exceptionally well controlled electrical and mechanical properties.
Taconic TLC laminates are engineered to provide a cost effective substrate. TLC laminates
are suitable for a wide range of microwave applications. TLC laminates offer far superior
electrical performance compared to thermoset laminates (e.g. FR-4, PPO, BT, polyimide,
and cyanate ester). The construction of the laminate provides exceptional mechanical
stability. The dielectric constant (Dk) is typically offered at 3.2 +/-0.05.
Please continue for a complete product listing.
TLC laminates can be sheared, drilled, milled, and plated using standard methods for
PTFE/woven fiberglass materials. The laminates are dimensionally stable, and exhibit
virtually no moisture absorption during fabrication processes.
TLC laminates are generally ordered clad on one or both sides with 1/2, 1, or 2 oz.
electrodeposited copper foil. Contact our Customer Service Department for alternate
claddings.
TLC laminates are tested in accordance with IPC-TM-650. A Certificate of Compliance
containing actual test data accompanies each shipment.
 Typical Values
Download PDF-File
Back to Products Overview
|
|
|
|
|
|
|