TSM-26 & TSM-30 RF & Microwave Laminate: Typical Values TSM TYPICAL VALUES PROPERTY TEST METHOD UNITS VALUE UNITS VALUE Dielectric Constant @ 10 GHz IPC TM 650 2.5.5.5.1 2.6 3.00 2.6 3.00 Dielectric Constant @ 40 GHz Damaskos Open Resonator -, 3.00 -, 3.00 Dissipation Factor @ 10 GHz IPC TM 650 2.5.5.5.1 0.0014 0.0013 0.0014 0.0013 Dissipation Factor @ 40 GHz Damaskos Open Resonator -, 0.002 -, 0.002 Moisture Absorption (0.060") IPC TM 650 2.6.2.1 % 0.03 % 0.03 Peel Strength (1 oz. VLP copper) IPC TM 650 2.4.8 lbs./linear inch >17.0 N/mm >3.0 Peel Strength (1 oz. VLP copper) IPC TM 650 2.4.8(at 150 ºC).3 lbs./linear inch >32.0 N/mm >5.6 Dielectric Breakdown IPC TM 650 2.5.6 kV 36 kV 36 Volume Resistivity IPC TM 650 2.5.17.1 Mohm/cm 1.7 x 108 Mohm/cm 1.7 x 108 Surface Resistivity IPC-TM-650 2.5.17.1 Mohm 2.3 x 107 Mohm 2.3 x 107 Arc Resistance IPC-TM-650 2.5.1 Seconds >247 Seconds >247 Flexural Strength Lengthwise ASTM D 790 psi >6,900 bar >475 Flexural Strength Crosswise ASTM D 790 psi >6,000 bar >414 Thermal Conductivity ASTM C 433 W/mK 0.27 W/mK 0.27 Tensile Strength Lengthwise ASTM D 3039 psi 5,100 bar 352 Tensile Strength Crosswise ASTM D 3039 psi 3,800 bar 262 Dimensional Stability Lengthwise IPC TM 650 2.4.39 in/in -0.00025 mm/mm -0.00025 Dimensional Stability Crosswise IPC TM 650 2.4.39 in/in -0.00022 mm/mm -0.00022 x-y CTE ASTM D 3386 (RT - 125 ºC) ppm/ºC 23-28 ppm/ºC 23-28 z CTE ASTM D 3386 (RT - 125 ºC) ppm/ºC 78 ppm/ºC 78 Flammability UL-94 V-0 V-0 Outgassing (%CVCM) ASTM E 595 % 0.004 % 0.004 How to order TSM TSM Data Sheet Back to Products Overview Corporate Homepage | ©2010 by Taconic | Update: 31/01/2012